Use the tables below to shortlist a material. Published values describe the listed model and construction. Confirm tolerances, test methods, width and availability before placing an order.
Published values describe the listed model and construction under standard test conditions. Confirm tolerances, test methods, width, and availability with VETEX before placing an order. Please note the model number in your inquiry if already identified.
HS1
High Silica Fabric (HS)
High-silica fabric (SiO₂ > 96%) offers continuous service up to 1000°C and short-term thermal peaks up to 1700°C. Actual suitability for molten slag, abrasion, or finished assemblies depends on fabric weight, weave structure, exposure duration, and test conditions.
Medium-silica fabric (SiO₂ ≈ 70% ± 5%) is rated for continuous service up to 800°C and provides higher mechanical abrasion resistance than high-silica constructions under comparable mechanical loads.
E-glass substrate continuous service is up to 550°C with short-term exposure up to 600°C. Available in loom-state or heat-treated (caramel/golden) finish.
E-glass substrate continuous service is up to 550°C with short-term exposure up to 600°C. Final suitability for coating, lamination or thermal protection depends on the finished construction, resin/coating compatibility and required test conditions.
The substrate and silicone coating have separate temperature limits: silicone coating continuous service -50°C to +250°C (short-term exposure 280–300°C); E-glass substrate continuous 550°C (short-term 600°C).
These figures do not independently establish performance of a finished coated product in a specific application. Confirm method, duration, and construction.
Coating and substrate limits differ. Confirm exact polyurethane formulation, coating add-on weight, and flame-retardant test scope for the intended fabrication process.
The aluminum foil or metallized layer and adhesive system have separate service temperature limits from the fiberglass substrate. Confirm adhesive rating and peel-strength requirements for the operating environment.
Published values describe the listed model and construction under standard test conditions. Confirm tolerances, test methods, width, and availability with VETEX before placing an order. Please note the model number in your inquiry if already identified.